Dell R630 server power specificationsSpecification ValueBTU 1058 BTU/hrVoltage 110 VAC (100–240 VAC auto-ranging 50/60 Hz)Plug Type NEMA 5-15PCircuit Breaker 15 ampPole 1AMP Draw 2.8 A, 310 W (based on 110 voltage)Note:The above power configuration is based on the following example:• Two E5-2620 Processors• Two 495W power supplies• Two 300GB HDDs• CPU load 100%• Eight 4 GB 1866 MT/s DIMMsInstalling the server in the rackAbout this taskNote:Although not used frequently, Avaya customers are required to have a monitor, USB keyboard,and USB mouse available for use by installation and/or servicing technicians.Before you beginGet the Rack Installation Instructions that are shipped with the hardware for more information. If notshipped with the hardware, see the Dell documentation Web site for instructions.Procedure1. Examine contents of shipping container (Avaya provided equipment), and ensure that the 6-digit material code on the order matches the 6-digit material code on the shipping container.2. Verify that the rack is installed according to the manufacturer's instructions and inaccordance with all local codes and laws. Verify that the rack is grounded in accordance withlocal electrical code.3. Remove the cabinet doors, if necessary.4. Attach the rails to the rackDell R630 server power specificationsNovember 2015 Installing the Dell PowerEdge R630 Server 15Comments on this document? infodev@avaya.com