Dell PowerEdge R805 Installation Manual

Also see for PowerEdge R805 System: Installation instructions Getting started guide Hardware owner's manual Update guide Solution guide

Contents

Dell PowerEdge R805 Installation Manual Manual pdf 17 page image

Rack Installation Guide 152 Push the mounting rail forward until the mounting hooks enter theirsquare holes, and then push down on the mounting-bracket flange untilthe mounting hooks seat and the push button pops out and clicks(see Figure 1-5).3 At the back of the cabinet, pull back on the mounting-bracket flange untilthe mounting hooks enter their square holes, and then push down on theflange until the mounting hooks seat and the push button pops out andclicks.4 Repeat step 1 through step 3 for the mounting rail on the other side ofthe rack.NOTE: Ensure that the mounting rails are mounted at the same verticalposition on both sides of the rack.Installing the VersaRails Mounting RailsNOTE: Ensure that the rotating mounting brackets on the slide assemblies arein the VersaRail configuration. See Figure 1-6.1 At the front of the rack cabinet, position one of the mounting railsso that its mounting-bracket flange fits between the marks you placed(or numbered locations) on the vertical rails in "Marking the Rack"on page 10 (see Figure 1-6).The three holes on the front of the mounting-bracket flange should alignwith the holes between the marks you made on the front vertical rail.2 Install two 10-32 x 0.5-inch flange-head Phillips screws in the upper andlower holes in the mounting-bracket flange to secure the mounting railto the front vertical rail.3 At the back of the cabinet, pull back on the mounting-bracket flange untilthe mounting holes align with their respective holes on the back verticalrail.4 Install two 10-32 x 0.5-inch flange-head Phillips screws in the upper andlower holes in the mounting-bracket flange to secure the mounting railto the back vertical rail.5 Repeat step 1 through step 4 for the mounting rail on the other sideof the rack.NOTE: Ensure that the mounting rails are mounted at the same positionon the vertical rails on each side of the rack.