Dell PowerEdge R820 Technical Manual

Also see for PowerEdge R820: Manual Installation Installation Portfolio guide Getting started guide

Dell PowerEdge R820 Technical Manual Manual pdf 25 page image

DellPowerEdge T110 II Technical Guide 257 Memory7.1 OverviewThe PowerEdge T110 II supports DDR3 memory, providing a high performance, high-speed memoryinterface capable of low latency response and high throughput. The T110 II supports unbuffered ECCDDR3 DIMMs (UDIMM).Key features of the T110 II memory system include: 2 channels per processor Support for UDIMM ECC DDR3 DIMMs DDR3 speeds of 1066/1333/1600MT/s 4 DIMM sockets (32GB maximum capacity) Support for single-rank and dual-rank DIMMs7.2 DIMMs SupportedThe T110 II supports the following DIMM types: 1GB, DDR3 UDIMM, 1333/1600 with ECC 2GB, DDR3 UDIMM, 1333/1600 with ECC 4GB, DDR3 UDIMM, 1333/1600 with ECC 8GB, DDR3 UDIMM, 1333/1600 with ECC7.3 DIMM SlotsThe PowerEdge T110 II has four 72-bit (240-pin) DIMM slots for memory, supporting up to 2 DIMMs perchannel. The modules are configured as 72 bits wide to provide for ECC. The memory controller inthe processor performs the ECC.7.4 SpeedThe PowerEdge T110 II supports up to 1600MT/s DDR3 memory.7.5 SparingMemory sparing is not supported.7.6 MirroringMemory mirroring is not supported.7.7 RAIDMemory RAID is not supported.7.8 Supported ConfigurationsSupported memory configurations for the T110 II are listed in Table 9. For the latest information onmemory options, visit Dell.com.