Dell PowerEdge RAID Controller S100 User Manual

Dell PowerEdge RAID Controller S100 User Manual Manual pdf 37 page image

Installing the Drivers 375Installing the DriversThe Dell PowerEdge RAID Controller (PERC) S100 or PERC S100 adapterrequire controller drivers to operate with the supported operating systems.This chapter contains the procedures for installing the controller drivers forthe following operating systems:• Microsoft Windows Server 2008• Microsoft Windows Server 2008 R2• Microsoft Windows Server 2003 SP2NOTE: Microsoft Windows Server 2003 R2 is not supported.Installing the Microsoft Windows DriversDownloading the Controller Driver Media1 Go to support.dell.com/support/downloads.2 Select Choose by Service TagEnter a Tag.3 Enter the Service Tag of the system on which you want to install thePERC S100 adapter/PERC S300 adapter drivers and select Go.NOTE: Alternatively, you can select Choose a ModelSelectModel. Navigate to Servers, Storage, NetworkingPowerEdge Server. Select the model of your system and selectConfirm.4 Choose the applicable operating system.5 Expand the SAS RAID Controller category.6 Select Download Now for the appropriate controller driver.NOTE: Load a blank optical medium (CD-ROM or DVD) in your system.