Option DescriptionRedirection AfterBootEnables or disables the BIOS console redirection when the operating system isloaded. This option is set to Enabled by default.System Profile Settings detailsThe System Profile Settings screen details are explained as follows:Option DescriptionSystem Profile Sets the system profile. If you set the System Profile option to a mode other thanCustom, the BIOS automatically sets the rest of the options. You can only changethe rest of the options if the mode is set to Custom. This option is set toPerformance Per Watt (OS).NOTE: All the parameters on the system profile setting screen are availableonly when the System Profile option is set to Custom.CPU PowerManagementSets the CPU power management. This option is set to OS DBPM by default. DBPMis Demand-Based Power Management.MemoryFrequencySets the speed of the system memory. You can select Maximum Performance,Maximum Reliability, or a specific speed.Turbo Boost Enables or disables the processor to operate in the turbo boost mode. This optionis set to Enabled by default.C1E Enables or disables the processor to switch to a minimum performance state whenit is idle. This option is set to Enabled by default.C States Enables or disables the processor to operate in all available power states. Thisoption is set to Enabled by default.Memory RefreshRateSets the memory refresh rate to either 1x or 2x. This option is set to 1x by default.Uncore Frequency Enables you to select the Processor Uncore Frequency option.Dynamic mode enables the processor to optimize power resources across thecores and uncore during runtime. The optimization of the uncore frequency toeither save power or optimize performance is influenced by the setting of theEnergy Efficiency Policy option.Energy EfficientPolicyEnables you to select the Energy Efficient Policy option.The CPU uses the setting to manipulate the internal behavior of the processor anddetermines whether to target higher performance or better power savings.Number of TurboBoot EnabledCores forProcessor 1Controls the number of turbo boost enabled cores for processor 1. The maximumnumber of cores is enabled by default.Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. This option is set toEnabled for all system profiles, except Custom by default.NOTE: This option can be disabled only if the C States option in the Custommode is set to disabled.29