Dell PowerEdge T710 Conversion Manualline

Also see for PowerEdge T710: Manual Update Hardware installation instructions Hardware owner's manual Technical guidebook

Contents

Dell PowerEdge T710 Conversion Manualline Manual pdf 3 page image

Tower-to-Rack Conversion Guide 3Safety InstructionsUse the following safety guidelines to ensure your own personal safety and tohelp protect your system and working environment from potential damage.For complete safety and regulatory information, see the safety instructionsthat shipped with your system. Warranty information might be included inthis document or as a separate document.SAFETY: Rack Mounting of SystemsObserve the following precautions for rack stability and safety. Also refer tothe rack installation documentation accompanying the system and the rackfor specific caution statements and procedures.Systems are considered to be components in a rack. "Component" refers toany system as well as to various peripherals or supporting hardware.CAUTION: Instructions for Rack-Mounted Systems:• Your rack kit has been approved only for the rack cabinet provided. It isyour responsibility to ensure that installation of the equipment into anyother rack complies with all applicable standards. Dell disclaims all liabilityand warranties with respect to combinations of equipment with any otherrack.• Before installing your equipment in a rack, install all front and sidestabilizers. Failure to install stabilizers can allow the rack to tip over.• Always load from the bottom up, and load the heaviest items first.• Do not overload the AC power supply branch circuit that provides powerto the rack.• Do not stand or step on any components in the rack.Installing the Tower-to-Rack KitRemoving the Bezel1 Unlock the keylock at the right side of the bezel.2 Slide the release lever to the right to unlatch the bezel.3 Rotate the top of the bezel away from the front panel.4 Unhook the bottom of the bezel and pull the bezel away from the system.