Installation on a VMware ESXi Server 132Dell CUI Commands ListThe Dell Command User Interface (CUI) is a client program that connects to the Dell Monitor Server.The program operates only on SNMP devices and is used only on operating systems that supportcharacter commands. The Dell CUI is primarily used to search for SNMP devices and to set operatingsystem shutdown parameters. Table 6 lists the Dell CUI commands.Table 6. Dell CUI CommandsCommand Descriptiondel Purpose: Delete SNMP deviceFormat: del target_ip [[target_ip]]Example: del 172.18.128.32help Purpose: List all CUI commandsFormat: helpimport Purpose: Import batch files and execute commandsFormat: import target_fileExample: import mybatch.txtlist Purpose: List all SNMP devices connected to monitorFormat: listlistshut Purpose: List shutdown parameter messagesFormat: listshut [-ip target_ip]Option: -ip target_ip: IPv4 or IPv6 addressExamples: listshut -ip 172.18.127.123 (list messages for one device)listshut (list messages for all devices)powerby Purpose: Show or Set message of "Powered by"Format: powerby [-ip target_ip] [-s count]Options: -ip target_ip: IPv4 or IPv6 address-s count: Segment 1 or 2Example: powerby -ip 172.18.127.25 -s 1quit Purpose: Exit CUIFormat: quitredundant Purpose: Show, Add, or Remove IP for “Redundant UPS Input Setting”Format: redundant [-r] [[target_ip]]Option: -r Removes redundant SNMP devicesExamples: redundant 172.18.128.32 172.18.127.50 (add redundant ip)redundant -r (remove all redundant ip)redundant (list all redundant IP messages)
