Dell PowerEdge UPS 500T User Manual

Also see for PowerEdge UPS 500T: Installation and configuration User guide Installation notes Notice User guide

Contents

Dell PowerEdge UPS 500T User Manual Manual pdf 14 page image

Dell UPS Local Node ManagerUSER'S GUIDE EXTENSION FOR MICROSOFT VIRTUAL ARCHITECTURESDellups.comDell ULNM - User guide extension - HyperV R1 & R2rev0.01CHAPTER: Installation142.9.2. STEP 2 (CONFIGURATION)When started, the application automatically performs a Quick scan. Using the Quick scan operation, you will discover:=>Serial line connected UPSs (RS232 or USB)The discovered UPS connected through (RS232 or USB) is automatically assigned as thePower source (the Status icon is Green )=> Networked UPSs through broadcast within a few seconds (Dell UPS Management CardH910P)The discovered UPS connected through (Network) are not automatically assigned as thePower source (You have to select the node and click on the button Set as Power Source theicon becomes Green )The discovered nodes are displayed in Settings Auto DiscoveryFor the other nodes, please perform the discovery based on IP address ranges (Range scan) Using the Range Scan operation you will discover the nodes that are outside of the Networksegment and nodes that are not compatible with the ”Quick scan” feature.In the Settings Shutdown page, assign the IP address of the UPS that powers the local Computer.In the Settings User List page, assign the access rights through “login and password”

/ 16

Related manuals for Dell PowerEdge UPS 500T