Dell PowerVault 132T Upgrade Manual
Also see for PowerVault 132T: Upgrade guide
                                                          | |
Contents |
12 升级到 LTO-3 磁带驱动器模块w w w . d e l l . c o m | s u p p o r t . d e l l . c o m 图 1-1. 卸下驱动器模块盖板4 小心地将新的 LTO-3 驱动器模块滑入到位。请参阅图 1-2。应将驱动器模块的金属边缘插入到驱动器托架左侧的塑料导向器中。图 1-2. 插入驱动器模块5 拧紧驱动器模块上的四个指旋螺钉，直至驱动器模块与机箱平齐。6 重新为磁带库连接电缆。• 对于 SCSI，请使用 SCSI 电缆将驱动器连接至主机，并终结总线。• 对于本机 FC，使用一条具有 LC 连接器的 FC 电缆，将 LTO-3 驱动器连接至 FC 主机总线适配器或交换机。确保 FC 电缆另一端的连接器与要连接 LTO-3 驱动器的设备相匹配。7 将磁带库重新连接至电源插座。 |
Related manuals for Dell PowerVault 132T
Dell PowerVault 132T Upgrade Manual
Dell PowerVault 136T Upgrade Manual
Dell PowerVault NX1950 Upgrade Manual
Dell PowerVault Manual
Dell PowerVault 130T User Manual
Dell PowerVault 100T Manual
Dell PowerVault 120T User Manual
Dell PowerVault 100T User Manual
Dell PowerVault 136T LTO Update Manual
Dell PowerVault 200S Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine