1-4 Rac k -t o -Tow er C on v e r si on Guidew w w . d e l l . c o m | s u p p o r t . d e l l . c o mBefore You BeginBefore you begin removing your system from the rack and converting it to a tower system,carefully read “Safety Instructions.”Removing the Rack DoorsSee the procedures for removing doors in the documentation provided with your rackcabinet.Recommended Tools and SuppliesThe following tools are required to perform the conversion:• A #2 Phillips screwdriver• A 3/16-inch hex-head (Allen) wrench• A Torx T-10 driver (for removing and installing the front panels)Conversion TasksRemoving a system from the rack and removing the RapidRails™ or VersaRails™ rackmounting hardware from the rack cabinet includes the following tasks:• Removing the rack doors• Removing the system from the rack• Removing the front panel• Installing the tower front panel• Installing the base, covers, and bezel• Removing the RapidRails or VersaRails mounting rail assemblies• Replacing the rack doors2H982bk1.book Page 4 Monday, November 5, 2001 10:12 AM