Dell PowerVault 3000i System Installation Manual

Also see for PowerVault MD3000i: Getting started Tuning guide User guide Hardware owner's manual Information update

Contents

Dell PowerVault 3000i System Installation Manual Manual pdf 8 page image

8 IntroductionIntroduction to Storage ArraysA storage array includes various hardware components, such as physical disks, RAID controller modules,fans, and power supplies, gathered into enclosures. An enclosure containing physical disks accessedthrough RAID controller modules is called a RAID enclosure.One or more host servers attached to the storage array can access the data on the storage array. You canalso establish multiple physical paths between the host(s) and the storage array so that loss of any singlepath (through failure of a host server port, for example) does not result in total loss of access to data on thestorage array.The storage array is managed by MD Storage Manager software running either on a host server or adedicated management station. On a host server system, MD Storage Manager and the storage arraycommunicate management requests and event information directly via iSCSI ports. On a dedicatedmanagement station, MD Storage Manager communicates with the storage array either through anEthernet connection on the RAID controller modules or via the host agent installed on the host server.Using MD Storage Manager, you configure the physical disks in the storage array into logical componentscalled disk groups, then divide the disk groups into virtual disks. You can make as many disk groups andvirtual disks as your storage array configuration and hardware permit. Disk groups are created in theunconfigured capacity of a storage array, while virtual disks are created in the free capacity of a diskgroup.Unconfigured capacity is comprised of the physical disks not already assigned to a disk group. When avirtual disk is created using unconfigured capacity, a disk group is automatically created. If the onlyvirtual disk in a disk group is deleted, the disk group is also deleted. Free capacity is space in a disk groupthat has not been assigned to a virtual disk.Data is written to the physical disks in the storage array using RAID technology. RAID levels define theway in which data is written to physical disks. Different RAID levels offer different levels of accessibility,redundancy, and capacity. You can set a specified RAID level for each disk group and virtual disk on yourstorage array.You can also provide an additional layer of data redundancy by creating disk groups that have a RAIDlevel other than 0. Hot spares can automatically replace physical disks marked as Failed.For more information on using RAID and managing data in your storage solution, see the Dell™PowerVault™ Modular Disk Storage Manager User’s Guide.