6 Getting Started With Your System• Standard baseboard management controller with serial access.• Back-panel connectors include PS/2 mouse and keyboard, serial, video,two USB connectors, and one NIC connector.• One 3.5-inch CD, DVD, or combination CD-RW/DVD in a peripheraldrive bay.NOTE: DVD devices are data only.• Support for the following internal hard-drive configurations:– Up to four internal, 1-inch, SATA hard drives with integrated drivecontrollers.– Up to four internal, 1-inch, Serial-Attached SCSI (SAS) hard driveswith an optional SAS controller card or backplane.NOTE: Hot-plug capability is supported only when SATA or SAS drives areconnected to the optional SAS controller card or backplane.• Optional Dell Remote Access Card (DRAC 4) for remote systemsmanagement. This option requires a dedicated PCI slot.• One 420-W power supply.For more information about specific features, see “Technical Specifications”on page 11.The following software is included with your system:• A System Setup program for quickly viewing and changing systemconfiguration information. For more information on this program, see“Using the System Setup Program” in the Hardware Owner’s Manual.• Enhanced security features, including a system password and a setuppassword, available through the System Setup program.• System diagnostics for evaluating system components and devices.For information about using the system diagnostics, see “Running theSystem Diagnostics” in your Hardware Owner’s Manual.• Video drivers for displaying many popular application programs in high-resolution modes.• SATA or SAS device drivers that allow the operating system tocommunicate with devices attached to the integrated SATA or SASsubsystem. For more information about these drivers, see “InstallingDrives” in your Hardware Owner’s Manual.• Systems management software and documentation CDs.