Dell PowerVault MD3000 Systems Information Update

Also see for PowerVault MD3000: Support Matrix Brochure Information update Configuration Hardware owner's manual

Contents

Dell PowerVault MD3000 Systems Information Update Manual pdf 9 page image

Information Update 9Complete the following steps to reset the password to an MD3000 array ifyour system is running the Windows Server 2008 operating system:1 Obtain a terminal application capable of COM port connections.2 Configure the application to use the communication settings as describedon page 23 of the Dell PowerVault Modular Disk Storage Manager User’sGuide.3 Proceed with the password reset procedure described on page 24 of theUser’s Guide.Modular Disk Storage ManagerThe following updates apply to the Modular Disk Storage Manager(MD Storage Manager):• When the MD Storage Manager is installed on Red Hat® EnterpriseLinux® systems or SUSE® Linux Enterprise Servers, or when theMD Storage Manager is running on SUSE Linux Enterprise Servers,Japanese and Simplified Chinese are not supported.Physical Disk MigrationCold power-up migration of physical disks from one MD3000 duplexconfiguration to another MD3000 duplex configuration is supported onlywhen all physical disks are moved from one system to another. No othermigrations, including partial physical disk migration and RAID controllermodule migration, are supported.RAID LevelChange Disk Group RAID LevelFollow these instructions to change the RAID level of a disk group as needed:1 In MD Storage Manager, click the Modify tab and click Change DiskGroup RAID Level.2 Select the disk group that you want to modify.3 Select the new RAID level from the drop-down menu.4 Click Change to start the process.