Dell PowerVault MD3260 Owner's Manual

Also see for PowerVault MD3060e Series: Manual Installation and configuration guide Hardware and software guide Installation guide Getting started guide

Contents

Dell PowerVault MD3260 Owner's Manual Manual pdf 36 page image

Figure 25. Removing and Installing a RAID Controller Module or Expansion Module1. RAID controller module or expansion module2. release lever3. release tabInstalling A RAID Controller Module Or Expansion ModuleCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Insert the RAID controller module or expansion module into the bay until it seats into place.2. Push the release lever toward the chassis until it clicks into place.3. Connect all the cables and SFP modules to the RAID controller module or expansion module.4. Using the MD Storage Manager, verify that the new RAID controller module or expansion module is identified.5. If applicable, update the firmware for the RAID controller module or expansion module.For information about the latest firmware, see support.dell.com.36