Dell PowerVault MD3260i Deployment Manual

Also see for PowerVault MD3260i Series: Manual Installation and configuration guide Hardware and software guide Installation guide Getting started guide

Contents

Dell PowerVault MD3260i Deployment Manual Manual pdf 19 page image

3Installing MD Storage ManagerThe PowerVault MD Series resource media contains software and drivers for both Linux and Microsoft Windowsoperating systems.The root of the media contains a readme.txt file covering changes to the software, updates, fixes, patches, and otherimportant data applicable to both Linux and Windows operating systems. The readme.txt file also specifies requirementsfor accessing documentation, information regarding versions of the software on the media, and system requirements forrunning the software.CAUTION: Do not install MD Storage Manager exclusively on a virtual disk that is being actively managed by MDStorage Manager. Instead, install at least one instance of MD Storage Manager on a local disk that is runningSMagent and SMmonitor. Installing management software only on a virtual disk may prevent access to recoveryinformation in the event of multiple physical disk or enclosure failures.For more information on supported hardware and software for Dell PowerVault systems, see the Support Matrix atsupport.dell.com/manuals.NOTE: It is recommended that you install all the latest updates available at support.dell.com.The PowerVault MD3260i Series storage firmware installer provides features that include the core software andproviders. The core software feature includes the host-based storage agent, multipath driver, and MD Storage Managerapplication used to configure, manage and monitor the storage array solution. The providers feature include providersfor the Microsoft Virtual Disk Service (VDS) and Microsoft Volume Shadow-Copy Service (VSS) framework.NOTE: For more information about the Microsoft VDS and Microsoft VSS providers, see the Administrator's Guideat support.dell.com/manuals.NOTE: To install the software on a Windows or Linux system, you must have administrative or root privileges.NOTE: If Dynamic Host Configuration Protocol (DHCP) is not used, initial configuration of the management stationmust be performed on the same physical subnet as the storage array. Additionally, during initial configuration, atleast one network adapter must be configured on the same IP subnet as the storage array’s default managementport (192.168.128.101 or 192.168.128.102). After initial configuration, the management ports are configured using MDStorage Manager and the management station’s IP address can be changed back to the previous settings.The PowerVault MD Series resource media offers the following installation methods:• Graphical Installation (Recommended) — This is the recommended installation procedure. The installerpresents a graphical wizard-driven interface that allows customization of which components are installed.• Console Installation — This installation procedure is useful for Linux users who do not desire to install an X-Window environment on their supported Linux platform.• Silent Installation — This installation procedure is useful if you prefer to create scripted installations.Modular Disk Configuration UtilityThe PowerVault MD Configuration Utility (MDCU) is an optional utility that provides a consolidated approach forconfiguring the management and iSCSI host ports, and creating sessions for the iSCSI modular disk storage arrays. It isrecommended that you use PowerVault MDCU to configure iSCSI on each host server connected to the storage array.19