Dell PowerVault MD3620f Command Line Interface Manual

Also see for PowerVault MD3600f Series: Manual Support Matrix Owner's manual Deployment guide Configuration guide

Contents

Dell PowerVault MD3620f Command Line Interface Manual Manual pdf 219 page image

Script Commands 219Revive Physical DiskThis command forces the specified physical disk to the optimal state.CAUTION: Correct use of this command depends on the data configuration on allphysical disks in the disk group. Never attempt to revive a physical disk unlesssupervised by a Technical Support representative.Syntaxrevive physicalDisk [enclosureID,slotID]ParameterSave Enclosure Log DataThis command saves the enclosure log sense data to a file. Log sense data ismaintained by the environmental cards for each enclosure. Not all of theenvironmental cards contain log sense data.Syntaxsave allEnclosures logFile="filename"ParameterParameter DescriptionphysicalDisk Identifies the enclosure and slot where, the physical diskresides. Enclosure ID values are 0 to 99. Slot ID values are 0to 31. You must put brackets ([ ]) around the enclosure IDvalue and the slot ID value.Parameter DescriptionlogFile Name of the file to which to save the log sense data. Youmust put quotation marks (" ") around the file name.