Dell PowerVault MD3660i Deployment Manual

Also see for PowerVault MD3660i Series Storage Array: Manual Installation and configuration guide Hardware and software guide Installation guide Getting started guide

Contents

Dell PowerVault MD3660i Deployment Manual Manual pdf 28 page image

3. Restart network services using the following command:/etc/init.d/network restartUsing A DNS ServerIf you are using static IP addressing:1. In the Control Panel, select Network connections or Network and Sharing Center and then click Manage networkconnections.2. Right-click the network connection you want to configure and select Properties.3. On the General tab (for a local area connection) or the Networking tab (for all other connections), select InternetProtocol (TCP/IP), and then click Properties.4. Select Obtain DNS server address automatically or enter the preferred and alternate DNS server IP addresses andclick OK.Using A WINS ServerIf you are using static IP addressing:NOTE: If you are using a DHCP server to allocate WINS server IP addresses, you do not need to add WINS serveraddresses.1. In the Control Panel, select Network connections.2. Right-click the network connection you want to configure and select Properties.3. On the General tab (for a local area connection) or the Networking tab (for all other connections), select InternetProtocol (TCP/IP), and then click Properties.4. Select Advanced → WINS tab and click Add.5. In the TCP/IP WINS server window, type the IP address of the WINS server and click Add.6. To enable use of the Lmhosts file to resolve remote NetBIOS names, select Enable LMHOSTS lookup.7. To specify the location of the file that you want to import into the Lmhosts file, select Import LMHOSTS and thenselect the file in the Open dialog box.8. Enable or disable NetBIOS over TCP/IP.If using Microsoft Windows Server 2008 Core Version, use the netsh interface command to configure the iSCSI portson the host server.Linux Host SetupTo set up a Linux host network, you must configure the IP address and netmask of each iSCSI port connected to thestorage array. The specific steps depend on whether you are configuring TCP/IP using DHCP or configuring TCP/IPusing a static IP address.NOTE: The server IP addresses must be configured for network communication to the same IP subnet as thestorage array management and iSCSI ports.Using DHCPIf you are using DHCP (root users only):1. Edit the /etc/sysconfig/network file:28