Dell PowerVault NX1950 Deployment Manual

Also see for PowerVault NX1950: Deployment guide Important information Getting started Installation guide Installation and troubleshooting guide

Contents

20 Quick Install Steps for Initiator-Target Connection9 If you choose the Advanced option, you can select the IQN identifier byperforming the following steps:a When you choose the Advanced.. option, the Advanced Identifiersscreen appears and displays the Add option. Select Add.b The Add/Edit Identifier appears and provides four options namely—IQN, DNS Domain Name, IP address, and MAC Address to add theIQN identifier. Choose any one of the four options.c Type in the value or choose the value through the Browse option, andthen select OK.The IQN identifier is displayed in the Advanced Identifiers screenand the fields IQN, DNS Domain Name, IP address, and MACAddress are populated.d Select the populated value and select OK.e In the iSCSI Initiator Identifiers screen, the IQN identifier field ispopulated with appropriate information. Click Advanced to viewalternate identifiers.f Select Next.10 The Completing the Create iSCSI Target wizard appears. Click Finish.Creating a Virtual Disk1 Right-click the newly created Target and click Create Virtual Disk foriSCSI Target. The Create Virtual Disk wizard appears. Select Next.2 To create a file, choose the Browse option, select a volume on the storagearray and type a file name with an extension .vhd.For example, create Z:\vol1.vhd, where Z is the mounted volume fromstorage array and vol1.vhd is the filename. Select Next.3 In the Size screen, choose the appropriate size from Currently availablefree space and click Next.4 The Description screen may appear. Enter the Virtual disk description, ifrequired and click Next.