Dell PowerVault NX3100 Administrator's Manual

Also see for PowerVault NX200: Manual Hardware owner's manual Getting started guide Troubleshooting guide Information update

Dell PowerVault NX3100 Administrator's Manual Manual pdf 42 page image

42 Using Your NAS System6 Click File Screening ManagementFile Screens.7 Either right-click or use Create File Screen option from the right pane.8 Follow the wizard, select the path (volume or folder in which you want tocreate the file screen), select your preferred File Screen Properties andclick Create.The newly-created file screen is displayed in the central pane.9 Select any of the existing file screens and right-click or use the options inright-most panes to change the file screen properties.Creating a New VolumePerform the following configuration steps.NOTE: Backup Operator or Administrator is the minimum membership required toperform this configuration.1 From your NAS system or remote desktop, open disk management, selectthe Rescan Disks option.The central pane lists the LUNs of storage located on your NAS system.NOTE: The default status for the newly-created LUN in Disk management isUnknown and Offline.2 Select the Disk, right-click, and select the Online option.Now the disk is seen as Unknown and Not Initialized.3 Select the Disk, right-click, and select the Initialize Disk option. In theInitialize Disk dialog box, select the disk(s) to initialize.A pop-up window to select the partition style for the selected disks isdisplayed with the following options:a MBR (Master Boot Record)b GPT (GUID Partition Table)4 Select a partition style and click OK.NOTE: The disk is initialized as a basic disk.5 In the middle pane, select the disk and run the New Simple Volume…wizard.