Figure 12. Removing and Installing a Memory Module1. memory module2. memory-module socket ejectors (2)3. alignment key6. Install memory-module blanks in vacant memory-module socket(s) to ensure proper system cooling.7. Install the cooling shroud.8. Close the system.9. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.Installing Memory ModulesWARNING: The memory modules are hot to the touch for some time after the system has been powered down.Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edgesand avoid touching the components on the memory module.CAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.CAUTION: To ensure proper system cooling, memory-module blanks must be installed in any memory socket that isnot occupied. Remove memory-module blanks only if you intend to install memory in those sockets.1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet andperipherals.2. Open the system.3. Remove the cooling shroud.4. Locate the memory-module sockets.5. Press the ejectors on the memory module socket down and out to allow the memory module to be inserted into thesocket. If a memory module blank is installed in the socket, remove it.43
