View MenuNOTE: When you select an option in the View menu, you must confirm the option before proceeding to the nextaction.Option DescriptioniDRAC IP Displays the IPv4 or IPv6 addresses for the iDRAC7. Addresses include DNS (Primary and Secondary),Gateway, IP, and Subnet (IPv6 does not have Subnet).MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.Name Displays the name of the Host, Model, or User String for the systemNumber Displays the Asset tag or the Service tag for the system.Power Displays the power output of the system in BTU/hr or Watts. The display format can be configured in theSet home submenu of the Setup menu.Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format can be configured inthe Set home submenu of the Setup menu.Diagnostic IndicatorsThe diagnostic indicators on the system front panel display error status during system startup.NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.The following section describes system conditions and possible corrective actions associated with these indicators:Electrical indicatorCondition Corrective ActionThe indicator blinks amber if the systemexperiences an electrical error (forexample, voltage out of range, or a failedpower supply or voltage regulator).See the System Event Log or system messages for the specificissue. If it is due to a problem with the power supply, check theLED on the power supply. Re-seat the power supply by removingand reinstalling it. If the problem persists, see Getting Help.Temperature indicatorCondition Corrective ActionThe indicator blinks amber if thesystem experiences a thermal error(for example, a temperature out ofrange or fan failure).Ensure that none of the following conditions exist:• A cooling fan is removed or has failed.• System cover, cooling shroud, EMI filler panel, memory-module blank, or back-filler bracket is removed.• Ambient temperature is too high.• External airflow is obstructed.See Getting Help.12
