POST behaviorOption DescriptionAdapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters.Default setting: Enable Adapter WarningsNumlock Enable Allows you to enable the Numlock option when the computer boots.Enable Network. This option is enabled by default.Fn Lock Options Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their standardand secondary functions. If you disable this option, you cannot toggle dynamically the primary behavior of thesekeys. The available options are:• Fn Lock—enabled by default• Lock Mode Disable/Standard—enabled by default• Lock Mode Enable/SecondaryFastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:• Minimal• Thorough—enabled by default• AutoExtended BIOSPOST TimeAllows you to create an extra preboot delay. The options are:• 0 seconds—enabled by default.• 5 seconds• 10 secondsFull Screen Log • Enable Full Screen Logo—not enabledWarnings anderrors • Prompt on warnings and errors—enabled by default• Continue on warnings• Continue on warnings and errorsManageabilityOption DescriptionIntel AMTCapabilityAllows you to provision AMT and MEBx Hotkey function is enabled, during the system boot.• Disabled• Enabled - by default• Restrict MEBx AccessMEBX Hotkey When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.• Enable USB Provision - disabled by defaultMEBX Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.• Enable MEBx hotkey—enabled by defaultVirtualization supportOption DescriptionVirtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilitiesprovided by Intel Virtualization Technology.Enable Intel Virtualization Technology—enabled by default.System setup 37