Dell Precision 5510 Owner's Manual

Also see for Precision 5510: Owner's manual Service manual Service manual Setup and specifications guide Owner's manual

Contents

Dell Precision 5510 Owner's Manual Manual pdf 24 page image

3. Replace the screws that secure the display hinges to the palm-rest assembly.4. Adhere the tape and route the touch-screen cable through the routing guides on the fan.5. Connect the touch-screen cable and display cable to the system board.6. Replace the screw that secures the display-cable bracket to the system board.7. Follow the procedures in After Working Inside Your Computer.Removing the DC-in Connector1. Follow the procedures in Before Working Inside Your Computer.2. Remove the:a) base coverb) battery3. Perform the following steps to remove the I/O board:a) Disconnect the DC-in cable from the system board [1].b) Remove the screw that secures the DC-in cable to the computer.c) Remove the DC-in connector from the computer.Installing the DC-in Adapter Port1. Place the DC-in adapter port into the slot on the palm-rest assembly.2. Route the power-adapter port cable through its routing guides on the palm-rest assembly.3. Replace the screw that secures the power-adapter port to the palm-rest assembly.4. Connect the power-adapter port cable to the system board.5. Install the:a) batteryb) base cover6. Follow the procedures in After Working Inside Your Computer.Removing the antenna cover1. Follow the procedures in Before Working Inside Your Computer.2. Remove the:a) base coverb) batteryc) WLAN Card24 Extracción e instalación de componentes