Dell Precision 5530 Service Manual

Also see for 5530 Mono Laser: Quick reference guide User guide Service manual Setup and speci?cations guide Setup and specifications

a Remove the captive screw to release the bracket that secures the WLAN card to the computer [1] and lift the bracket awayfrom the computer [2].b Disconnect the antenna cables from the WLAN card [3].c Slide and remove the WLAN card from its connector on the board [4].Installing the WLAN Card1 Align the notch on the WLAN card with the tab on the WLAN-card connector on the system board.2 Align the bracket which secures the WLAN card to the palmrest assembly.3 Connect the antenna cables to the WLAN card.CAUTION: To avoid damage to the WLAN card, do not place any cables under it.NOTE: The color of the antenna cables is visible near the tip of the cables. The antenna-cable color scheme for the WLANcard supported by your computer is as follows:Table 2. Antenna-Cable Color Scheme for the WLAN CardConnectors on the WLAN card Antenna-cable colorMain (white triangle) whiteAuxiliary (black triangle) blackMultiple input, multiple output (grey triangle) Grey (optional)4 Tighten the captive screw to secure the bracket and the WLAN card to the palmrest assembly.5 Install the:a Batteryb Base cover6 Follow the procedures in After Working Inside Your Computer22 Disassembly and reassembly