Option DescriptionDefault setting: Allow Non-Admin Password Changes is selected.Non-Admin SetupChangesAllows you to determine whether changes to the setup options are allowed when an Administrator Password is set.If disabled the setup options are locked by the admin password.• allow wireless switch changesUEFI CapsuleFirmware UpdatesAllows you to enable or disable. This option controls whether this system allows BIOS updated via UEFI capsuleupdate packages. The options are:• Enable UEFI Capsule Firmware—enabled by defaultComputrace Allows you to activate or disable the optional Computrace software The options are:• Deactivate• Disable• Activate (selected by default)NOTE: The Activate and Disable options will permanently activate or disable the feature and no furtherchanges will be allowedCPU XD Support Allows you to enable the Execute Disable mode of the processor.Enable CPU XD Support (default)OROM KeyboardAccessAllows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The optionsare:• Enable• One Time Enable• DisableDefault setting: EnableAdmin SetupLockoutAllows you to prevent users from entering Setup when an Administrator password is set.Default Setting: DisabledMaster passwordlockoutThis option is not selected by defaultSecure Boot screen optionsOption DescriptionSecure Boot Enable This option enables or disables the Secure Boot feature.• Disabled• EnabledDefault setting: Enabled.Expert KeyManagementAllows you to manipulate the security key databases only if the system is in Custom Mode. The Enable CustomMode option is disabled by default. The options are:44 System setup