Dell Precision Dual USB Type-C Thunderbolt 3 Dock User Manual

Display Resolution TableTable 1. Display Resolution TableSingle Display (maximumresolution) Dual Display (maximumresolution) Triple Display (maximumresolution) Quad Display (maximumresolution)**DP + mDP (Single Image):5120 x 2880 @ 60HzDP/mDP/Type-C: 3840 x 2160@ 60 HzHDMI: 3840 x 2160 @ 24/30 HzVGA: 1920 x 1200 @ 60 Hz***Type-C: 5120 x 2880 @ 60HzDP/mDP/Type-C: 3840 x 2160@ 60 HzDP+VGA: 2 x 2560 x 1440 @60HzmDP+HDMI: 2 x 2560 x 1440@60 Hz or 3840 x 2160 @ 30HzVGA may be limited to 2048 x1280DP + mDP+HDMI: 3 x 3840 x2160 @ 30 HzNOTE: DP port at 60 Hzis supported, but mDP+HDMI are limited to 30Hz for 4k**mDP + HDMI + DP + VGA:3x3840 x 2160 @ 30 Hz + 1x1920 x1200 (VGA)NOTE: **Discrete onlymode or “SpecialGraphics Mode”.NOTE: If higher resolution monitors are used, the Intel Graphics driver will make a judgement based on monitor specificationsand display configurations. Some resolutions may not be supported and so will be removed from the Intel Graphics Media ControlPanel.NOTE: Resolution support is also dependent on the monitor’s Extended Display Identification Data (EDID) resolution.NOTE: The 5K resolution support is only available in either of these conditions:1 With discrete graphics mode only, or special graphics mode, or2 *** Using the Thunderbolt 3 Type–C to a dual DisplayPort adapter.NOTE: ** Configuration supported with AMD and Nvidia in discrete-only mode or special-graphics mode. These modes are listedin the BIOS for the Dell Precision 7730/7530 systems and will require disabling switchable graphics for discrete-only mode orenabling special-graphics mode when Switchable is enabled. If the system does not have these options in the BIOS, then 4monitors are NOT supported.Setup of External Monitors 23