Dell Precision T1600 Service Manual

Also see for Precision T1600: Setup & features Setup and features information

Contents

Error Message Descriptionmemory modules and, if necessary,replace them.Diskette drive 0 seek failure A cable may be loose or the computerconfiguration information may not matchthe hardware configuration.Diskette read failure The floppy disk may be defective or acable may be loose. If the drive accesslight turns on, try a different disk.Diskette subsystem reset failed The floppy drive controller may be faulty.Drive not ready No floppy disk is in the drive. Put a floppydisk in the drive.Diskette write protected The floppy disk is write-protected. Slidethe write-protect notch to the openposition.Gate A20 failure One or more memory modules may befaulty or improperly seated. Reinstall thememory modules and, if necessary,replace them.General failure The operating system is unable to carryout the command. This message is usuallyfollowed by specific information—forexample, Printer out of paper. Take theappropriate action to resolve the problem.Hard-disk drive configuration error The hard drive failed initialization.Hard-disk drive controller failure The hard drive failed initialization.Hard-disk drive failure The hard drive failed initialization.Hard-disk drive read failure The hard drive failed initialization.Invalid configuration information-pleaserun SETUP programThe computer configuration informationdoes not match the hardwareconfiguration.Invalid Memory configuration, pleasepopulate DIMM1DIMM1 slot does not recognize a memorymodule. The module should be re-seatedor installed.Keyboard failure A cable or connector may be loose, or thekeyboard or keyboard/mouse controllermay be faulty.77