Option DescriptionIntel® TurboBoost™ Allows you to enable or disableIntel TurboBoost mode of the processor.• Disabled - Does not allow the TurboBoost driver to increase the performancestate of the processor above the standard performance.• Enabled - Allows the Intel TurboBoost driver to increase the performance ofthe CPU or graphics processor.Hyper-Thread Control Allows you to enable or disable the Hyper-Threading technology. This option isdisabled by default.Table 6. Power ManagementOption DescriptionAC Recovery Specifies how the computer will respond when AC power is applied after a AC powerloss. You can set the AC Recovery to:• Power Off (default)• Power On• Last Power StateAuto On Time This option sets the time of the day when you would like the system to turn onautomatically. Time is kept in standard 12-hour format (hour:minutes:seconds). Thestartup time can be changed by typing the values in the time and A.M./P.M. fields.• Disabled - The system will not automatically power up.• Every Day - The system will power up every day at the time you specifiedabove .• Weekdays - The system will power up Monday through Friday at the time youspecified above.• Select Days - The system will power up on days selected above at the timeyou specified above.NOTE: This feature does not work if you turn off your computer using the switchon a power strip or surge protector or if Auto Power is set to disabled.Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.• Disabled• Enabled in S5 only• Enabled in S4 and S5This option is disabled by default.Fan Control Override Controls the speed of the system fan. This option is disabled by default.NOTE: When enabled, the fan runs at full speed.USB Wake Support This option allows you to enable USB devices to wake the computer from standby.• Enable USB Wake Support - This option is disabled by default.Wake on LAN This option allows the computer to power up from the off state when triggered by aspecial LAN signal. Wake-up from the Standby state is unaffected by this setting andmust be enabled in the operating system. This feature only works when the computeris connected to AC power supply.42