Bottom viewMonitor SpecificationsPower Management ModesIf you have VESA's DPMS™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not inuse. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:Pin AssignmentsVGA ConnectorLabel Description1 AC power cord connector2 DVI connector3 VGA connectorVESA Modes HorizontalSyncVertical Sync Video PowerIndicatorPower ConsumptionNormal operation Active Active Active White 42 W (maximum)Active-off mode Inactive Inactive Blanked Amber Less than 2 WSwitch off - - - Off Less than 1 WNOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from themonitor.PinNumber15-pin Side of theConnected Signal Cable1 Video-Red