Stand dimensions:HeightWidthDepth137.10 mm (5.40 inches)175.80 mm (6.92 inches)175.80 mm (6.92 inches)137.10 mm (5.40 inches)175.80 mm (6.92 inches)175.80 mm (6.92 inches)Weight:Weight with packaging 4.60 kg (10.14 lb) 4.95 kg (10.91 lb)Weight with stand assembly, cables,adapter, and dongle 3.69 kg (8.14 lb) 3.91 kg (8.62 lb)Weight of stand assembly 0.60 kg (1.32 lb) 0.60 kg (1.32 lb)Environmental CharacteristicsThe following table lists the environmental conditions for your monitor:Model Number Dell S2240M monitor Dell S2340M monitorTemperatureOperatingNon-operating0 ° C to 40 ° C (32 ° F to 104 ° F)Storage: -20 ° C to 60 ° C (-4 ° F to 140 ° F)Shipping: -20 ° C to 60 ° C (-4 ° F to 140 ° F)0 ° C to 40 ° C (32 ° F to 104 ° F)Storage: -20 ° C to 60 ° C (-4 ° F to 140 ° F)Shipping: -20 ° C to 60 ° C (-4 ° F to 140 ° F)HumidityOperatingNon-operating10 % to 80 % (non-condensing)Storage: 5 % to 90 % (non-condensing)Shipping: 5 % to 90 % (non-condensing)10 % to 80 % (non-condensing)Storage: 5 % to 90 % (non-condensing)Shipping: 5 % to 90 % (non-condensing)AltitudeOperatingNon-operating5,000 m (16,405 ft) max12,192 m (40,000 ft) max5,000 m (16,405 ft) max12,192 m (40,000 ft) maxThermal dissipation78.43 BTU/hour (maximum)61.38 BTU/hour (typical)81.84 BTU/hour (maximum)64.79 BTU/hour (typical)LCD Monitor Quality & Pixel PolicyDuring the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is afixed pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a "bright dot". Wh en thepixel remains black, it is known as a "dark dot".In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considerednormal and within competitive standards. For more information, see Dell Support site at: support.dell.com.Maintenance GuidelinesCaring for Your MonitorCAUTION: Read and follow the safety instructions before cleaning the monitor.CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable forthe antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.Back to Contents Page