Dell S2440L User Manual

Also see for S2440L: Installation Quick setup

Dell S2440L User Manual Manual pdf 15 page image

13 CEC14 Reserved (N.C. on device)15 DDC CLOCK (SCL)16 DDC DATA (SDA)17 DDC/CEC Ground18 +5V POWER19 HOT PLUG DETECTPlug and Play CapabilityYou can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) usingDisplay Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings ifdesired. For more information about changing the monitor settings, see Operating the Monitor.LCD Monitor Quality and Pixel PolicyDuring the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the displayquality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.Maintenance GuidelinesCleaning Your MonitorCAUTION: Read and follow the safety instructions before cleaning the monitor.WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:To clean your anti-static screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the anti-static coating. Donot use benzene, thinner, ammonia, abrasive cleaners, or compressed air.Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.If you notice white powder when you unpack your monitor, wipe it off with a cloth.Handle your monitor with care as a darker-colored monitor may get scratched and show white scuff marks more than a lighter-colored monitor.To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.Back to Contents Page