Dell SCv360 Owner's Manual

Also see for SCv360: Getting started guide

Contents

Dell SCv360 Owner's Manual Manual pdf 61 page image

Figure 77. Verify that Cable Management Arms are Secure9. Connect the power cables and the Mini-SAS HD cables to the expansion enclosure.Next steps1. Power on the expansion enclosure and storage system.2. Change the operation mode of the Storage Center to Normal.3. Use SupportAssist to send diagnostic data to Dell Technical Support.Expansion Enclosure Rack RailsThe SCv360 expansion enclosure is mounted in a rack using rack rails.If the rack rails are damaged, they must be replaced.Remove the Expansion Enclosure RailsRemoval of the expansion enclosure rails must be performed during a scheduled maintenance window when the Storage Centersystem is unavailable to the network.Prerequisites1. Use SupportAssist to send diagnostic data to Dell Technical Support.2. Change the operation mode of the Storage Center to Maintenance.3. Use Dell Storage Manager to shut down the storage system connected to the expansion enclosure.Steps1. Make sure all the cables are labeled.2. Disconnect the power cables and Mini-SAS HD cables from the expansion enclosure3. Remove the screws that secure the chassis to the rack.4. Remove the expansion enclosure from the rack rails.WARNING: Do not attempt to the lift the expansion enclosure by yourself. Always have assistance when lifting theexpansion enclosure. If installed above the lower 20U of a rack, a customer-provided mechanical lift must be used toavoid injury.5. Remove the rack rails from the rack.Replacing SCv360 Expansion Enclosure Components 61