Dell SE2416H User Manual

Also see for SE2416H: Quick start guide Simplified service manual Disassembly Procedures

Dell SE2416H User Manual Manual pdf 32 page image

32 | TroubleshootingTroubleshootingWARNING: Before you begin any of the procedures in this section, follow theSafety Instructions.Self-TestYour monitor provides a self-test feature that allows you to check if your monitor isfunctioning properly. If your monitor and computer are properly connected but themonitor screen remains dark, run the monitor self-test by performing the followingsteps:1. Turn off both your computer and the monitor.2. Disconnect all video cables from the monitor. This way, the computer doesn’thave to be involved.3. Turn on the monitor.If the monitor is working correctly, it detects that there is no signal and one of thefollowing message appears. While in self-test mode, the power LED remains white.Dell SE2416HThe display will go into Power Save Mode in 5 minutes.www. dell.com/support/monitorsNo HDMI CableDell SE2416HThe display will go into Power Save Mode in 5 minutes.www.d ell.com/support/monitorsNo VGA CableNOTE: This box also appears during normal system operation, if the video cableis disconnected or damaged.4. Turn Off your monitor and reconnect the video cable; then turn on yourcomputer and the monitor.If your monitor remains dark after you reconnect the cables, check your videocontroller and computer.