Dell ST2010-BLK User Manual

Also see for ST2010-BLK: Setup guide Setting up

Contents

Dell ST2010-BLK User Manual Manual pdf 5 page image

*[ST2010] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.Preset display area: 442.8 mm (W) X 249.1 mm (H)Horizontal 442.8 mm (17.43 inches)Vertical 249.1 mm (9.81 inches)Pixel pitch 0.2768(H) X 0.2768(W)Viewing angle 160° (vertical) typical, 160° (horizontal) typicalLuminance output 250 cd/m²(typical)Contrast ratio 1000 to 1 (typical)Faceplate coating Anti-GlareBacklight 2-CCFL edgelight systemResponse Time 5ms panel typicalColor depth 16.7 million colorsColor Gamut 83%*Resolution SpecificationsSupported Video ModesHorizontal scan range 30 kHz to 83 kHz (automatic)Vertical scan range 56 Hz to 76 Hz (automatic)Maximum preset resolution 1600x900 at 60 HzVideo display capabilities (HDMIplayback) 480p, 576p, 720p, 1080p, 480i, 576i, 1080i.Preset Display ModesDisplay Mode Horizontal Frequency(kHz)Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity(Horizontal/Vertical)VESA, 720 x 400 31.5 70.0 28.3 -/+VESA, 640 x 480 31.5 60.0 25.2 -/-VESA, 640 x 480 37.5 75.0 31.5 -/-VESA, 800 x 600 37.9 60.7 40.0 +/+VESA, 800 x 600 46.9 75.0 49.5 +/+VESA, 1024 x 768 48.4 60.0 65.0 -/-VESA, 1024 x 768 60.0 75.0 78.8 +/+VESA, 1152 x 864 67.5 75.0 108.0 +/+VESA, 1280 x 1024 64.0 60.0 108.0 +/+VESA, 1280 x 1024 80.0 75.0 135.0 +/+VESA, 1600 x 900 55.5 60.0 97.75 +/-Electrical SpecificationsVideo input signals Analog RGB, 0.707 Volts +/- 5%, positive polarity at 75 ohm input impedanceHDMI, 600mV for each differential line, 100 ohm input impedance per differential pairSynchronization input signals Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC ongreen)AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)Inrush current 120 V: 30 A (Max.)240 V: 60 A (Max.)Physical CharacteristicsDownloaded from ManualMonitor.com Manuals