Dell ST2421LB User Manual
                                 | |
Contents
| 
Connecting the MonitorTo connect your monitor to the computer perform the following steps/instructions:1. Turn off your computer and disconnect the power cable.2. Connect the HDMI cable, white (digital DVI-D), or blue (analog VGA) display connector cable to the corresponding video port on the back of yourcomputer. Do not use all the cables on the same computer. Use all of the cables only when they are connected to different computers with appropriatevideo systems.Connecting the blue VGA cableConnecting the White DVI Cable*Connecting the HDMI Cable*After you have completed connecting the VGA/DVI/HDMI cable, follow the procedure below to complete your monitor setup:1. Plug the power cables for your computer and monitor into a nearby outlet.CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.NOTE: *Optional purchase item. To purchase DVI or HDMI cable, please visit Dell.comNOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary. |
Related manuals for Dell ST2420LB
manualsdatabase
Your AI-powered manual search engine