7Installing Systems Management Software OnCitrix XenServerThe Server Administrator is installed on Citrix XenServer using the Supplemental Pack. The Supplemental Pack for CitrixXenServer can be installed in two ways:• During the installation of XenServer• On a running systemDuring The installation Of XenServerTo install the Supplemental Pack for Citrix XenServer during the installation of XenServer:1. Start the installation of XenServer as usual and follow the instructions on the screen.2. One of the early questions during the installation process of XenServer is if you want to install any SupplementalPacks; click Yes and continue with the installation process.3. After the base XenServer image is installed (5-10 minutes depending on the speed of the system), you are promptedto insert the Supplemental Pack CD. Eject the XenServer installation CD from the optical drive, insert theSupplemental Pack CD and click OK. The message OpenManage Supplemental Pack was found isdisplayed. To confirm installation, click Use and click OK.NOTE: If you have more than one Supplemental Pack, (either the Linux Supplemental Pack from Citrix or otherthird-party applications) you can install them in any order, although it is recommended that you install theSupplemental Pack last.4. After completing the Supplemental Pack installation (2-5 minutes, depending on the speed of the system), you areprompted to install other Supplemental Packs. If you do not want to install other supplemental packs, click Skip andpress . The XenServer is installed successfully.NOTE: When installing RPM packages, to avoid warnings concerning the RPM–GPG key, import the key with acommand similar to the following:rpm --import<OM DVD mountpoint>SYSMGMT/srvadmin/linux/RPM-GPG-KEYOn A Running SystemTo install the Supplemental Pack for Citrix XenServer 6.1 on a running system:1. Burn the Supplemental Pack ISO file to a CD/DVD or download the ISO file to the server.If you are downloading the ISO file, mount it on a temporary directory as follows:$ mount -o loop <openmanange-supplemental-pack-filename>.iso /mntIf you burned the ISO file to a CD/DVD, insert it in the optical drive and run:$ mount /dev/cdrom /mnt2. Install the supplemental pack:$ cd /mnt$ ./install.sh67
