Dell Sonicwall Sonicpoint Ace Getting Started Manual

Dell Sonicwall Sonicpoint Ace Getting Started Manual Manual pdf 35 page image

| 33Verifying WAN(Internet)connectivityComplete the following steps to confirm your Internetconnectivity:1 Disconnect a client computer from any other networkconnections (LAN, 3G, and more).2 Connect the client computer to the wireless accesspoint by selecting the appropriate SSID.3 Launch your Web browser.4 Enter “http://www.sonicwall.com” in the address barand press Enter on the keyboard. The Dell SonicWALLwebsite displays. If you are unable to browse to awebsite, refer to "Troubleshooting tips" on page 33.Troubleshooting tipsIf the SonicPoint locates a peer SonicOS device, the two unitsperform an encrypted exchange and the profile assigned tothe relevant wireless zone is used to automatically configure(provision) the newly added SonicPoint unit.Your SonicPoint is automatically included in the list on theWireless > SonicPoints page of the management interface forthe Dell SonicWALL security appliance managing theSonicPoint. If it does not show in the list:• Make sure the SonicPoint is connected to an interfacethat is configured as part of a Wireless zone. Either thedefault WLAN zone, or a custom zone with type set to“wireless” is required.• Click Synchronize SonicPoints. This is located in theSonicOS management interface on the SonicPoint >SonicPoints page and forces the Dell SonicWALLappliance, if connected, to download a new SonicPointimage from the Dell SonicWALL back-end server.• Ensure that the SonicPoint is connected to a 802.3afcompliant PoE powered Ethernet connection. If usingPoE to power your SonicPoint appliance, keep in mindthat a PoE-capable switch or PoE injector is required.SonicPoint_ACe_GSG.book Page 33 Monday, September 29, 2014 5:23 PMDraft Document