Dell Storage Center SCv2000 Deployment Manual

Also see for Storage Center SCv2000: Owner's manual Getting started guide Getting started guide

Contents

Label the Back-End CablesLabel the back-end cables that interconnect the storage controllers or label the back-end cables thatconnect the storage system to the expansion enclosures.PrerequisitesLocate the cable labels provided with the expansion enclosures.About this taskApply cable labels to both ends of each SAS cable to indicate the chain number and side (A or B).Steps1. Starting with the top edge of the label, attach the label to the cable near the connector.Figure 64. Attach Label to Cable2. Wrap the label around the cable until it fully encircles the cable. The bottom of each label is clear sothat it does not obscure the text.Figure 65. Wrap Label Around Cable3. Apply a matching label to the other end of the cable.74 Back-End Cabling and Connecting Power