Dell U2212HM User Manual
Also see for U2212HM: Setting up
                                                | |
Contents
| 
Electrical SpecificationsModel U2212HMVideo input signalsAnalog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedanceDigital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohminput impedanceDP 1.1a signal input supportSynchronization input signals TTL levels required and separate syncs (including Trigger points), SOG (CompositeSYNC on green)AC inputvoltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (Typical)Inrush current (@25°C) 120 V : 30 A (Max.)240 V : 60 A (Max.)Physical CharacteristicsModel U2212HMConnector type 15-pin D-subminiature, blue connector; DVI-D, white connector; DP, black connectorSignal cable typeDigital: Detachable, DVI-D, Solid pins, shipped detached from the monitorAnalog: Detachable, D-Sub, 15 pins, shipped detached from the monitorDimensions (with stand)Height (extended) 484.5 mm (19.07 inches)Height (compressed) 355.6 mm (14.00 inches)Width 513.0 mm (20.20 inches)Depth 183.3 mm (7.22 inches)Dimensions (without stand)Height 304.5 mm (11.99 inches)Width 513.0 mm (20.20 inches)Depth 59.5 mm (2.34 inches)Stand dimensionsHeight (extended) 401.2 mm (15.80 inches) |
Related manuals for Dell U2212HM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine