Dell U2412M User Manual
Also see for UltraSharp U2412M: User guideSpecificationsSetting-up guideProduct dimensionsUser guide
                                          | |
Contents
| 
To remove the stand:1. Place the monitor on a flat surface.2. Press and hold the stand release button.3. Lift the stand up and away from the monitor.Wall Mounting (Optional)(Screw dimension: M4 x 10 mm).Refer to the instructions that come with the VESA-compatible wall mounting kit.1. Place the monitor panel on a soft cloth or cushion on a stable, flat table.2. Remove the stand.3. Use a Philips crosshead screwdriver to remove the four screws securing the plastic cover.4. Attach the mounting bracket from the wall mounting kit to the monitor.5. Mount the monitor on the wall by following the instructions that came with the wall mounting kit.Back to Contents PageNOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface.NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set upinstructions.NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load bearing capacity of 4.52 kg. |
Related manuals for Dell UltraSharp U2412M
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine