Dell U2412M User Manual

Also see for UltraSharp U2412M: User guide Specifications Setting-up guide Product dimensions User guide

Dell U2412M User Manual Manual pdf 11 page image

Pin Number 4-Pin Side of the Signal Cable1 VCC2 DMD3 DPD4 GNDUSB Ports1 upstream - back4 downstream - 2 on the back; 2 on the left sideNOTE: USB 2.0 functionality requires a USB 2.0-capable computer.NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may takea few seconds to resume normal functionality.LCD Monitor Quality and Pixel PolicyDuring the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect thedisplay quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: support.dell.com.Maintenance GuidelinesCleaning Your MonitorWARNING: Read and follow the safety instructions before cleaning the monitor.WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Donot use benzene, thinner, ammonia, abrasive cleaners, or compressed air.Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.If you notice white powder when you unpack your monitor, wipe it off with a cloth.Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.Back to Contents Page