Dell UP2414Q User Manual
Also see for XPS One 24: User guideSetup guideService manualUser guide
                                                                          | |
Contents
|
Operating the Monitor 45Setting Up the DP1.2 DisplayThe default out of factory setting in the UP2414Q is DP1.1a.To enable 3840 x 2160 at 60 Hz, ensure the graphics card of the DP source isDP1.2 certified with MST feature, capable of supporting resolution up to 3840x 2160 at 60 Hz, and its driver supports DisplayID v1.3, then change the DPsetting to DP1.2 by performing the below steps:A) Monitor is able to show content1. Use OSD button to navigate to Display Settings.Dell UP2414QBrightness/ContrastInput SourceResolution: 3840x2160, 30HzColor SettingsAspect Ratio 16:950Dynamic ContrastUniformity CompensationDisplayPort 1.2Display InfoReset Display SettingsDisplay SettingsPBP SettingsEnergy SettingsMenu SettingsOther SettingsPersonalizeEnergy UseSharpnessNoise ReductionOff2. Go to DisplayPort 1.2 selection.3. Select Enable or Disable accordingly.4. Follow the screen message to confirm selection of DP1.2 or DP1.1a.Please ensure your Graphics Card can support DP MST (Daisy chain)/HBR2 (HighBit Rate) before changing the monitor setting to DP1.2.Incorrect setting may result in blank screen on monitor.Dell UP2414QConfirmExitDP MST/HBR2 will be disabled for DP1.1a.Dell UP2414QConfirmExit |
Related manuals for Dell XPS One 24
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine