Dell UltraSharp U2419H User Manual

Also see for UltraSharp U2419H: User guide

Dell UltraSharp U2419H User Manual Manual pdf 26 page image

26 | Setting Up the MonitorAdjusting the Rotation Display Settings of Your SystemAfter you have rotated your monitor, you need to complete the procedure below to adjustthe Rotation Display Settings of your System.NOTE: If you are using the monitor with a non-Dell computer, you need to go thegraphics driver website or your computer manufacturer website for information onrotating the ’contents’ on your display.To adjust the Rotation Display Settings:1 Right-click on the desktop and click Properties.2 Select the Settings tab and click Advanced.3 If you have an AMD graphics card, select the Rotation tab and set the preferredrotation.4 If you have an nVidia graphics card, click the nVidia tab, in the left-hand columnselect NVRotate, and then select the preferred rotation.5 If you have an Intel® graphics card, select the Intel graphics tab, click GraphicProperties, select the Rotation tab, and then set the preferred rotation.NOTE: If you do not see the rotation option or it is not working correctly, go towww.dell.com/support and download the latest driver for your graphics card.Connecting Your MonitorWARNING: Before you begin any of the procedures in this section, follow theSafety Instructions.To connect your monitor to the computer:1 Turn off your computer.2 Connect the HDMI/DP-DP/USB cable from your monitor tothe computer.3 Switch on your monitor.4 Select the correct input source at monitor OSD Menu and turn on your computer.NOTE: U2419H/U2419HX/U2719D/U2719DX default setting is DP 1.4. A DP 1.1 Graphiccard may not display normally. Please refer to “product specific problems – No imagewhen using DP connection to the PC” to change default setting.