1. Connect the headphones to the audio port (3.5 mm) on the tablet.2. Insert the earphones in your ears and adjust the volume level to a comfortable level.NOTE: When you connect a headphone or an external audio device to the audio connector, theintegrated speakers on your tablet are muted automatically.CAUTION: To prevent damage to the headphones when disconnecting it from the tablet, pull theconnector and not the cable.NOTE: It is recommended that you turn down the volume level before plugging the headphone,and then adjust to a comfortable level. Sudden exposure to loud sounds can cause hearing damage.Removing the Micro-SD cardCAUTION: Removing the Micro-SD card when transferring data may cause data loss or result inapplication errors. Make sure your tablet has finished all save operations to the Micro-SD card.1. Enter the Desktop mode. Touch Safely Remove Hardware in the notification area at thebottom-right corner of the screen.NOTE: If you don’t see Safely Remove Hardware , touch Show Hidden Icons to display allicons in the notification area.2. Touch Eject SD Memory Card. A message appears confirming that the Micro-SD card can be safelyremoved. If a warning message appears stating the Micro-SD card cannot be removed, ensure alldata transfers involving the Micro-SD card are complete.3. Insert the tip of a small bent paperclip into the small hole on the micro-SD slot cover.4. Push the tip all the way into the hole until the micro-SD tray ejects. Pull the micro-SD card tray out.5. Remove the micro-SD card from the tray.Removing the Battery1. Follow the procedures in Before Working Inside Your Tablet.2. Remove the base cover.18