Dell Vostro 13 5310 Service Manual

Also see for P145G: Service manual Quick start

Steps1. Place the display assembly on a clean and flat surface with the display panel facing up.2. Place the palm-rest and keyboard assembly under the display hinges.CAUTION: To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the displayassembly.3. Close the left-display hinge and align the screw holes on the left-display hinge with the screw holes on the palm-rest andkeyboard assembly.4. Replace the screw (M2x3) that secures the left-display hinge to the palm-rest and keyboard assembly.5. Replace the screw (M2x4) that secures the left-display hinge to the palm-rest and keyboard assembly.6. Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board.7. Place the Type-C port-bracket on the palm-rest and keyboard assembly.8. Align the screw holes on the Type-C port-bracket to the screw holes on the right-display hinge.9. Replace the two screws (M2x4) that secure the Type-C port-bracket to the palm-rest and keyboard assembly.10. Connect the display cable to the connector on the system board and close the latch.11. Adhere the tape that secures the display-cable connector latch to the system board.12. Place the display-cable bracket over the display-cable connector.13. Align the screw hole on the display-cable bracket to the screw hole on the system board.40 Removing and installing components