Assigning a System Password and Setup PasswordYou can assign a new System Password and/or Setup Password or change an existing System Passwordand/or Setup Password only when Password Status is Unlocked. If the Password Status is Locked, youcannot change the System Password.NOTE: If the password jumper is disabled, the existing System Password and Setup Password isdeleted and you need not provide the system password to log on to the computer.To enter a system setup, press immediately after a power-on or re-boot.1. In the System BIOS or System Setup screen, select System Security and press .The System Security screen appears.2. In the System Security screen, verify that Password Status is Unlocked.3. Select System Password , enter your system password, and press or .Use the following guidelines to assign the system password:• A password can have up to 32 characters.• The password can contain the numbers 0 through 9.• Only lower case letters are valid, upper case letters are not allowed.• Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).Re-enter the system password when prompted.4. Type the system password that you entered earlier and click OK.5. Select Setup Password, type your system password and press or .A message prompts you to re-type the setup password.6. Type the setup password that you entered earlier and click OK.7. Press and a message prompts you to save the changes.8. Press to save the changes.The computer reboots.Deleting or Changing an Existing System and/or Setup PasswordEnsure that the Password Status is Unlocked (in the System Setup) before attempting to delete or changethe existing System and/or Setup password. You cannot delete or change an existing System or Setuppassword, if the Password Status is Locked.To enter the System Setup, press immediately after a power-on or reboot.1. In the System BIOS or System Setup screen, select System Security and press .The System Security screen is displayed.2. In the System Security screen, verify that Password Status is Unlocked.3. Select System Password, alter or delete the existing system password and press or .4. Select Setup Password, alter or delete the existing setup password and press or .NOTE: If you change the System and/or Setup password, re-enter the new password whenpromoted. If you delete the System and/or Setup password, confirm the deletion whenpromoted.5. Press and a message prompts you to save the changes.6. Press to save the changes and exit from the System Setup.The computer reboots.40
