Dell Vostro 16 5635 MV9WG Owner's Manual

Also see for P117F: Setup and specifications Service manual Setup and specifications Setup and specifications Service manual

Solid-state driveRemoving the M.2 2230 solid-state drivePrerequisites1. Follow the procedure in Before working inside your computer.2. Remove the base cover.About this taskNOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.NOTE: If you are replacing the M.2 2230 solid-state drive with an M.2 2280 solid-state drive, the following images indicatehow to remove the M.2 2230 solid-state drive from the M.2 2230 solid-state drive bracket.NOTE: Device Encryption will be triggered when either the system board or storage (SSD) is replaced. Refer to BitLockerfor more information on suspending BitLocker.The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of theremoval procedure.Steps1. Remove the M2x3 screw that secures the M.2 2230 solid-state drive with bracket from the solid-state drive slot.2. Slide the M.2 2230 solid-state drive with bracket from the peg and lift it from the system board.3. Remove the M2x1.8 screw that secures the M.2 2230 solid-state drive to the M.2 solid-state drive bracket.4. Lift the M.2 2230 solid-state drive off the M.2 solid-state drive bracket.Installing the M.2 2230 solid-state drivePrerequisitesIf you are replacing a component, remove the existing component before performing the installation process.40 Removing and installing Customer Replaceable Units (CRUs)