Dell Vostro 230 Service Manual

Also see for Vostro 230: Setup and features information

Contents

l DVMT Mode (default)l UMA ModeDVMT/FIXED Memory — Allows you to set the size of the DVMT/FIXED Memory. Available Settings are:l 128 MBl 256 MB (default)l Maximum DVMTIntegratedPeripheralsConfigurationATA/IDE Configuration —l Disabledl Compatiblel PEG/PCI (default)USB Functions —l Enabled (default)l DisabledUSB Storage Functions —l Enabled (default)l DisabledAudio Controller —l Enabled (default)l DisabledIntegrated NIC —l Enabled (default)l DisabledLAN Boot ROM —l Enabled (default)l DisabledSerial Port Address —l 3F8/IRQ4 (default)l 2F8/IRQ3l 3E8/IRQ4l 2E8/IRQ3Bootup Num-Lock —l On (default)l OffQuick Boot —l Enabled (default)l DisabledPowerLow PowerModeEnables or disables low power mode.This option is disabled by default.When low power mode is enabled, the integrated network card is disabled when the computer shuts down or hibernates. Only add-innetwork cards will be able to remotely wake the computer.Suspend mode Sets the energy-saving mode of the ACPI function. It determines the Standby mode in the operating system. Available settings are:l S1 (POS)l S3 (STR) (default)When you select S1 (POS) mode, the power does not shut off and the supply status remains as it is. But when you select S3 (STR) mode, thepower is cut off after a delay. The computer’s status before it enters STR is saved in memory, and the computer can quickly return to thatprevious status when the STR function wakes.USB WakeupFrom S3Allows the system to wake up from USB peripheral that supports wake from USB. Available settings are:l Enabled (default)l DisabledRestore on ACPower LossDetermines what action the computer will take when power is restored. Available settings are:l Last Statel Onl Off (default)Resume by PS2 Allows the computer to resume back after go to standby using PS2 Devices. Available settings are: