Dell Vostro 5390 Service Manual

Also see for P114G: Setup and specifications Service manual Setup and specifications Service manual Setup and specifications guide

VideoOption DescriptionLCD Brightness Allows you to set the display brightness depending up on the power source—On Battery and On AC. TheLCD brightness is independent for battery and AC adapter. It can be set using the slider.NOTE: The video setting is visible only when a video card is installed into the system.SecurityTable 5. SecurityOption DescriptionAdmin Password Allows you to set, change, and delete the admin password.System Password Allows you to set, change, and delete the system password.Strong Password This option lets you enable or disable strong passwords for the system.Password Configuration Allows you to control the minimum and maximum number of characters allowed for aadministrative password and the system password. The range of characters is between 4and 32.Password Bypass This option lets you bypass the System (Boot) Password and the internal HDD passwordprompts during a system restart.● Disabled — Always prompt for the system and internal HDD password when they are set.This option is enabled by default.● Reboot Bypass — Bypass the password prompts on Restarts (warm boots).NOTE: The system will always prompt for the system and internal HDD passwords whenpowered on from the off state (a cold boot). Also, the system will always prompt forpasswords on any module bay HDDs that may be present.Password Change This option lets you determine whether changes to the System and Hard Disk passwords arepermitted when an administrator password is set.Allow Non-Admin Password Changes - This option is enabled by default.Non-Admin Setup Changes Determines whether changes to the setup option are permitted when an administratorpassword is set.UEFI Capsule FirmwareUpdatesThis option controls whether this system allows BIOS updates via UEFI capsule updatepackages. This option is selected by default. Disabling this option will block BIOS updatesfrom services such as Microsoft Windows Update and Linux Vendor Firmware Service(LVFS)TPM 2.0 Security Allows you to control whether the Trusted Platform Module (TPM) is visible to the operatingsystem.● TPM On (default)● Clear● PPI Bypass for Enable Commands● PPI Bypass for Disable Commands● PPI Bypass for Clear Commands● Attestation Enable (default)● Key Storage Enable (default)● SHA-256 (default)Choose any one option:● Disabled● Enabled (default)BIOS setup 41