Dell Vostro 5515 DVC9Y Service Manual

Also see for P106F: Setup and specifications Quick start Service manual Setup and specifications Service manual

1. Remove the three (M2.5x4.5) screws that secure the right display-hinge to the system board.2. Open the display hinge at an angle of 90 degrees.3. Disconnect the power-adapter port cable from the system board.4. Peel the tape that secures the power-adapter port cable to the system board.5. Remove the power-adapter port cable from the routing guide on the palm-rest and keyboard assembly.6. Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly.Installing the power-adapter portIf you are replacing a component, remove the existing component before performing the installation procedure.The following image indicates the location of the power-adapter port and provides a visual representation of the installationprocedure.Removing and installing components 51